Vol. 10 No. 2 (2019)

DOI: https://doi.org/10.31649/2413-4503-2019-10-2

Published: 2019-11-26

Approaches to demand modeling for goods transportation in corn logistics

Victor Bilichenko, Victoria Kotenko

4-9

Abstract views: 1021 | Downloads: 727

DOI https://doi.org/10.31649/2413-4503-2019-10-2-4-9
- PDF (Українська)
Features of the construction of an information system for assessing the parameters of the technical condition of vehicles in operating conditions

Vladimir Volkov, Igor Gritsuk, Yuriy Gritsuk, Tetyana Volkova, Vitalii Kashkanov, Yuri Volkov

10-15

Abstract views: 696 | Downloads: 301

DOI https://doi.org/10.31649/2413-4503-2019-10-2-10-15
- PDF (Українська)
Research agency approach to vehicle technical control

Volodimir Volkov, Viacheslav Pavlenko, Volodimir Kuzhel

16-23

Abstract views: 489 | Downloads: 337

DOI https://doi.org/10.31649/2413-4503-2019-10-2-16-23
- PDF (Українська)
Formation and analysis of the information model of the subject area of monitoring the parameters of the tachograph and tracker in the system of technical condition of the vehicle

Igor Gritsuk, Tamara Makarova, Roman Simonenko, Igor Khudiakov, Valentina Chernenko

24-33

Abstract views: 378 | Downloads: 292

DOI https://doi.org/10.31649/2413-4503-2019-10-2-24-33
- PDF (Українська)
Evaluation of the directions of development of the production and technical base of the enterprises of motor vehicle transport

Serhiy Kurnikov

34-39

Abstract views: 345 | Downloads: 305

DOI https://doi.org/10.31649/2413-4503-2019-10-2-34-39
- PDF (Українська)
The formulation and solution of the problem determining the least and largest values of the main characteristics of the particular class of two-link deformation

Volodymyr Mykhalevych, Volodymyr Kraievskyi

40-47

Abstract views: 305 | Downloads: 192

DOI https://doi.org/10.31649/2413-4503-2019-10-2-40-47
- PDF (Українська)
Increasing energy efficiency of wheel machines method of disconnecting cylinders in a vehicle engine

Andrii Molodan

48-53

Abstract views: 361 | Downloads: 261

DOI https://doi.org/10.31649/2413-4503-2019-10-2-48-53
- PDF (Українська)
Improvement of efficiency of emergency brakes of passenger cars equipped with a combined brake tracking system

Olexander Nazarov, Ivan Nazarov, Evgen Shpinda

54-64

Abstract views: 305 | Downloads: 470

DOI https://doi.org/10.31649/2413-4503-2019-10-2-54-64
- PDF (Українська)
Stamping sheet blanks and creating a safe structures

Vitalii Ogorodnikov, Tetiana Arkhipova, Volodymyr Makarov, Sergiy Sukhorukov

65-71

Abstract views: 346 | Downloads: 235

DOI https://doi.org/10.31649/2413-4503-2019-10-2-65-71
- PDF (Українська)
Development of a working tool with an integrated hydraulic drive of an asphalt pavement cold milling machine

Leonid Polishchuk, Vadim Miskov, Oleg Koval, Valeriy Kravchuk

72-80

Abstract views: 299 | Downloads: 231

DOI https://doi.org/10.31649/2413-4503-2019-10-2-72-80
- PDF (Українська)
Evaluation of controllability of a 4wd vehicle at a stable turn

Michael Podrigalo, Andriy Kashkanov, Alexander Morozov, Yuriy Tarasov, Nikolay Potapov, Vladislav Bisha

81-88

Abstract views: 581 | Downloads: 243

DOI https://doi.org/10.31649/2413-4503-2019-10-2-81-88
- PDF (Русский)
The reduction of energy on overcoming kinematic termination in transmission of fully drive traffic and vehicle means by regulating tire pressure is reduction

Nikolaj Potapov

89-94

Abstract views: 273 | Downloads: 186

DOI https://doi.org/10.31649/2413-4503-2019-10-2-89-94
- PDF (Русский)
Modeling of motor vehicles in inter-local transportation of cargoes interaction

Georgiy Prokudin, Svitlana Sharay, Myroslav Oliskevych, Maxym Roy

95-101

Abstract views: 420 | Downloads: 361

DOI https://doi.org/10.31649/2413-4503-2019-10-2-95-101
- PDF (Українська)
Normal provision for the use of main funds of automotive transport enterprises

Viktoria Ryzhova

102-107

Abstract views: 388 | Downloads: 217

DOI https://doi.org/10.31649/2413-4503-2019-10-2-102-107
- PDF (Українська)
To analysis of constructions of wheel vehicles for urban passengers

Volodymyr Sakhno, Viktor Bilichenko, Viktor Poliakov, Volodymyr Bosenko, Evgenie Misko

108-119

Abstract views: 670 | Downloads: 295

DOI https://doi.org/10.31649/2413-4503-2019-10-2-108-119
- PDF (Українська)
To the choice of the truck-tractor type for heavy duty semi-trailer

Volodymyr Sakhno, Viktor Polyakov, Igor Murovanyi, Svitlana Sharai

120-125

Abstract views: 412 | Downloads: 499

DOI https://doi.org/10.31649/2413-4503-2019-10-2-120-125
- PDF (Українська)
The influence of the mine trawl’s modernized movable operating element parameters on its operating performance

Bogdan Sokil, Oleksandr Yemelyanov, V`yacheslav Nagachevskyi, Roman Nanivskyi

126-133

Abstract views: 962 | Downloads: 258

DOI https://doi.org/10.31649/2413-4503-2019-10-2-126-133
- PDF (Українська)
Simulation of parameters of functioning of public passenger stopping points

Ihor Khitrov, Mykhailo Krystopchuk, Svitlana Pashkevych

134-140

Abstract views: 811 | Downloads: 426

DOI https://doi.org/10.31649/2413-4503-2019-10-2-134-140
- PDF (Українська)
Optimization of four-bar parameters steering linkage based on flat model

Sergii Chernenko, Eduard Klimov, Andrii Chernish, Ruslan Puzyr

141-147

Abstract views: 358 | Downloads: 264

DOI https://doi.org/10.31649/2413-4503-2019-10-2-141-147
- PDF (Українська)
The influence of contact loads on the properties of the working plated layer grain grinders

Olena Shilina

148-152

Abstract views: 264 | Downloads: 203

DOI https://doi.org/10.31649/2413-4503-2019-10-2-148-152
- PDF (Українська)

Vol. 10 No. 2 (2019)

Approaches to demand modeling for goods transportation in corn logistics

Features of the construction of an information system for assessing the parameters of the technical condition of vehicles in operating conditions

Research agency approach to vehicle technical control

Formation and analysis of the information model of the subject area of monitoring the parameters of the tachograph and tracker in the system of technical condition of the vehicle

Evaluation of the directions of development of the production and technical base of the enterprises of motor vehicle transport

The formulation and solution of the problem determining the least and largest values of the main characteristics of the particular class of two-link deformation

Increasing energy efficiency of wheel machines method of disconnecting cylinders in a vehicle engine

Improvement of efficiency of emergency brakes of passenger cars equipped with a combined brake tracking system

Stamping sheet blanks and creating a safe structures

Development of a working tool with an integrated hydraulic drive of an asphalt pavement cold milling machine

Evaluation of controllability of a 4wd vehicle at a stable turn

The reduction of energy on overcoming kinematic termination in transmission of fully drive traffic and vehicle means by regulating tire pressure is reduction

Modeling of motor vehicles in inter-local transportation of cargoes interaction

Normal provision for the use of main funds of automotive transport enterprises

To analysis of constructions of wheel vehicles for urban passengers

To the choice of the truck-tractor type for heavy duty semi-trailer

The influence of the mine trawl’s modernized movable operating element parameters on its operating performance

Simulation of parameters of functioning of public passenger stopping points

Optimization of four-bar parameters steering linkage based on flat model

The influence of contact loads on the properties of the working plated layer grain grinders

Language

Make a Submission

Information