Hydroimpulse drive of a vibration press with a two-stage five-line pressure impulse generator with parametric control of its second stage
DOI:
https://doi.org/10.31649/2413-4503-2024-19-1-33-41Keywords:
pressure pulse generator, sealing, hydraulic link, hydraulic pulse drive, press, drive, feed, pres-sure, strokeAbstract
Analysis of theoretical and experimental studies of the hydraulic pulse drive of technological vibration and vi-bration-impact machines (vibratory cutting and deformation strengthening of machine part surfaces, hydro-pulse vibrators, etc.) showed that the hydro-pulse drive allows for the implementation of various vibration technologies in a wide range of technical applications and with adjustable vibration loads on objects of technological influence. Based on the results of a theoretical study of existing designs of vibration press equipment based on a hydraulic pulse drive, a schematic and structural diagram of a hydraulic pulse vibration press with a two-stage five-line pressure pulse generator with parametric control of its second cascade and an executive link with a drive of the vibrating table of the vibropress from a piston hydraulic cylinder and a load of the object of technological influence of the hydraulic pulse drive from a plunger hydraulic cylinder, the body of which is installed on the architrave of the vibrating press, and the plunger is kinematically connected to the movable crossbeam of the vibrating press.
The article presents a description of the operation of a newly developed design of a hydraulic pulse vibrating press with a two-stage five-line pressure pulse generator with parametric control of its second stage, and provides the main calculation dependencies according to which the main geometric and force parameters of the developed drive design can be calculated. This design solution expands the technical and technological capabilities of the hydraulic pulse drive, as it provides a high-speed mode of vibration movement of the executive link – the vibration table of the vibration press in combination with the hydraulic load of the object of technological influence from an additional plunger hydraulic cylinder installed on the architrave of the vibration press, the plunger of which drives the movable crossbeam of the vibration press.
References
Р. Д. Іскович-Лотоцький, Р. Р. Обертюх, М. Р. Архипчук «Генератори імпульсів тиску для керування гідроімпуль-сними приводами вібраційних та віброударних технологічних машин» : монографія. Вінниця : УНІВЕРСУМ − Вінниця 2008. 171 с.
Р. Д. Іскович-Лотоцький, Р. Р. Обертюх, І.В. Севостьянов «Процеси та машини вібраційних і віброударних техно-логій»: монографія. – Вінниця : УНІВЕРСУМ − Вінниця 2006. – 291 с
Р. Р. Обертюх, А. В. Слабкий, Пристрої для віброточіння на базі гідроімпульсного привода : монографія. Вінниця : ВНТУ, 2015. ‒ 164 с.
Р. Д. Іскович-Лотоцький, Р. Р. Обертюх, О. В. Поліщук «Використання гідроімпульсного привода в обладнанні переробних виробництв» : монографія. Вінниця : УНІВЕРСУМ − Вінниця 2013. – 116 с.
Р. Р. Обертюх, А. В. Слабкий, С. Р. Андрухов, В. О. Кудраш «Параметричні однокаскадні генератори імпульсів тиску підвищеної пропускної здатності», Віснику машинобудування та транспорту – №1, 2019. – С. 40 – 48.
Р. Р. Обертюх, А. В. Слабкий, і О. В. Шпак, «ГІДРОІМПУЛЬСНИЙ ПАРАМЕТРИЧНИЙ ОДНОКАСКАДНИЙ ГЕ-НЕРАТОР ІМПУЛЬСІВ ТИСКУ З РЕГУЛЬОВАНИМ ТИСКОМ ‘ЗАКРИТТЯ’», Вісник ВПІ, вип. 4, с. 179–185, Серп. 2025.
Р. Д. Іскович-Лотоцький, Р. Р. Обертюх, М. Р. Обертюх, і В. І. Томчук, «Генератори імпульсів тиску для гідроім-пульсних приводів технологічних машин,» Збірник наукових праць Кіровоградського державного технічного універси-тету, вип. 7, с. 9-4, 2000.
Р. Р. Обертюх, і М. Р. Архипчук, «Генератори імпульсів тиску із параметричним принципом керування другим каскадом,» Вібрації в техніці та технологіях, № 4 (56), с. 60-65, 2009.
Р. Р. Обертюх, А. В. Слабкий, М. В. Марущак, «Віброударні гідроімпульсні пристрої підвищеної швидкодії для динамічного деформаційного зміцнення поверхонь деталей машин з вбудованим генератором імпульсів тиску», Наукові нотатки, Луцьк, Випуск 59, с. 204 ‒ 211, 2017.
Obertyukh, R., Slabkyі A., Polishchuk, L., Povstianoi, O., Kumargazhanova, S., & Satymbekov, M. (2022). DYNAMIC AND MATHEMATICAL MODELS OF THE HYDROIMPULSIVE VIBRO-CUTTING DEVICE WITH A PRESSURE PULSE GENERATOR BULT INTO THE RING SPRING. Informatyka, Automatyka, Pomiary W Gospodarce I Ochronie Środowiska, 12(3), 54–58. https://doi.org/10.35784/iapgos.3049
Obertyukh, R., Slabkyi, A., Petrov, O., Kudrash, V. (2021). Mathematical Modeling of the Device for Radial Vibroturning. In: Tonkonogyi, V., et al. Advanced Manufacturing Processes II . InterPartner 2020. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-68014-5_55
R. Obertyukh, A. Slabkyi, O. Petrov, and D. Bakalets, “Substantiation of the methodology for calculating the design of a small-sized hydraulic pulse vibrator,” Vibroengineering Procedia, vol. 56, pp. 22–28, Oct. 2024, doi: https://doi.org/10.21595/vp.2024.24512.
Obertyukh, R., Slabkyi, A., Petrov, O., Bakalets, D., Sukhorukov, S. (2022). Substantiation of the Design Calculation Method for the Vibroturning Device. In: Ivanov, V., Trojanowska, J., Pavlenko, I., Rauch, E., Peraković, D. (eds) Advances in Design, Simulation and Manufacturing V. DSMIE 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-06025-0_19
Р. Р. Обертюх, А. В. Слабкий, О. В. Поліщук, і О. С. Ганпанцурова, «Гідроімпульсні малогабаритні вібратори на базі прорізних пружин», ВМТ, вип. 15, вип. 1, с. 124–130, Лип 2022.
Downloads
-
PDF
Downloads: 37
