Journal of Mechanical Engineering and Transport

Current Issue

Vol. 19 No. 1 (2024)

DOI: https://doi.org/10.31649/2413-4503-2024-19-1

Published: 2024-07-12

Study of the influence of honing process parameters with silicate bars on the quality of the treated surface

Мykola Vynogradov, Tamara Makarova, Mykola Mastepan , Dmytro Savenok

3-10

Abstract views: 197 | Downloads: 83

DOI https://doi.org/10.31649/2413-4503-2024-19-1-3-10
- PDF (Українська)
Improvement of the method of assessment of software for the control of vehicle parameters

Volodymyr Volkov, Igor Gritsuk, Volodymyr Kuzhel , Tetiana Volkova , Ganna Pliekhova

11-20

Abstract views: 234 | Downloads: 67

DOI https://doi.org/10.31649/2413-4503-2024-19-1-11-20
- PDF (Українська)
Formation of the conditions for the effective functioning of the transportation system of the road transport enterprise

Tetyana Volobuyeva , Vyacheslav Syrota , Serhiy Mastepan, Mykola Mastepan

21-28

Abstract views: 130 | Downloads: 69

DOI https://doi.org/10.31649/2413-4503-2024-19-1-21-28
- PDF (Українська)
Methodological approach to solving the problem of functional reliability of automobile transport systems

Dmitry Golub, Viktor Bilichenko , Viktor Aulin, Artem Zamurenko , Ruslan Kichura

29-38

Abstract views: 200 | Downloads: 79

DOI https://doi.org/10.31649/2413-4503-2024-19-1-29-38
- PDF (Українська)
Improving the fuel efficiency of a spark ignition engine under full load conditions by adding nitrogen oxide to the air charge

Yurii Gutarevich , Mykola Hora

39-45

Abstract views: 132 | Downloads: 50

DOI https://doi.org/10.31649/2413-4503-2024-19-1-39-45
- PDF (Українська)
Ways of optimizing the quantity of individual transport in the limited possibilities of the street and road network

Volodymyr Dzyura, Mariya Babiy, Anastasia Stashkiv

46-54

Abstract views: 116 | Downloads: 42

DOI https://doi.org/10.31649/2413-4503-2024-19-1-46-54
- PDF (Українська)
Combined method of foundry and thermal processes of manufacturing castings from iron-carbon alloys

Volodymyr Doroshenko , Alexander Yanchenko

55-60

Abstract views: 93 | Downloads: 36

DOI https://doi.org/10.31649/2413-4503-2024-19-1-55-60
- PDF (Українська)
Methodological basis of determination and control biofuels expenditure in the vehicle movement process

Andrii Ilchenko

61-67

Abstract views: 90 | Downloads: 30

DOI https://doi.org/10.31649/2413-4503-2024-19-1-61-67
- PDF (Українська)
Methods of justification of spare parts stocks in the transport process management system

Andriy Kashkanov , Mykola Moskaliuk

68-74

Abstract views: 205 | Downloads: 52

DOI https://doi.org/10.31649/2413-4503-2024-19-1-68-74
- PDF (Українська)
Study of acceleration modes Skoda Octavia on a roller stand

Іhоr Мarmut , Vitaliy Kashkanov , Volodymyr Zuiev

75-84

Abstract views: 189 | Downloads: 34

DOI https://doi.org/10.31649/2413-4503-2024-19-1-75-84
- PDF (Українська)
The newest technologies in environmentally safe polymeric coatings: research, technologies, prospects

Viacheslav Pavlenko, Volodymyr Kuzhel, Serhii Semenchenko, Oleksandr Korniev, Pavlo Chernenko

85-94

Abstract views: 229 | Downloads: 55

DOI https://doi.org/10.31649/2413-4503-2024-19-1-85-94
- pdf (Українська)
Application of the CAD/CAE system Solidworks in the tasks of analysis of strength of parts of the clamping fixtures

Oleksandr Petrov , Oleh Piontkevych, Antonina Buda , Viktor Kolomiiets

95-102

Abstract views: 143 | Downloads: 49

DOI https://doi.org/10.31649/2413-4503-2024-19-1-95-102
- pdf (Українська)
Installing two internal combustion engines in series on a vehicle as a method of reducing torque unevenness

Mykhailo Podryhalo , Serhii Vakhniuk

103-108

Abstract views: 89 | Downloads: 38

DOI https://doi.org/10.31649/2413-4503-2024-19-1-103-108
- pdf (Українська)
The influence of towing links on the handling of tractor self-propelled chassis

Mikhail Podrigalo , Volodymyr Krasnokutskyi

109-114

Abstract views: 155 | Downloads: 44

DOI https://doi.org/10.31649/2413-4503-2024-19-1-109-114
- pdf (Українська)
Justification for choosing the type of belt conveyor drive

Leonid Polishchuk , Oleh Piontkevych , Mykola Burdeinyi, Vadym Trehubov

115-122

Abstract views: 184 | Downloads: 75

DOI https://doi.org/10.31649/2413-4503-2024-19-1-115-122
- pdf (Українська)
Increasing the efficiency of ensuring the performance of vehicles

Yuri Savin , Oleksandr Sokolenko

123-130

Abstract views: 101 | Downloads: 39

DOI https://doi.org/10.31649/2413-4503-2024-19-1-123-130
- pdf (Українська)
Study of the influence of external factors on the operational properties of an electric vehicle

Olha Sakno , Olena Sakno , Ievgen Medvediev , Serhii Tsymbal

131-138

Abstract views: 154 | Downloads: 62

DOI https://doi.org/10.31649/2413-4503-2024-19-1-131-138
- pdf (Українська)
Mathematical modeling of the movement of an armored vehicle with a 4×4 wheel formula with change of pressure in the wheel tires using the example of through KrAZ-Spartan

Mykola Sklyarov , Ivan Tsebriuk , Oleksii Yakovliev , Yevhenii Bondar , Andrii Kashkanov

139-149

Abstract views: 117 | Downloads: 55

DOI https://doi.org/10.31649/2413-4503-2024-19-1-139-149
- pdf (Українська)
Analysis of the influence of construction factors on the passability of armored tank vehicles and the method of its increase at the account of automatic regulation of air pressure in wheel tires

Mykola Sklyarov , Oleksii Yakovliev , Yevhenii Bondar , Vladysla Kolomytsev , Vitalii Kashkanov

150-156

Abstract views: 179 | Downloads: 44

DOI https://doi.org/10.31649/2413-4503-2024-19-1-150-156
- pdf (Українська)
Study of the process passenger transportation with modeling of public transport stops

Ihor Khitrov

157-164

Abstract views: 117 | Downloads: 45

DOI https://doi.org/10.31649/2413-4503-2024-19-1-157-164
- pdf (Українська)
Operation modes of the manipulator of the repair and evacuation machine

Yury Cherevko , Roman Zinko , Yury Skvarok , Andriy Polyakov

165-171

Abstract views: 122 | Downloads: 40

DOI https://doi.org/10.31649/2413-4503-2024-19-1-165-171
- pdf (Українська)

View All Issues

THIS SITE IS USED AS AN ARCHIVE

Journal of Mechanical Engineering and Transport

Current Issue

Study of the influence of honing process parameters with silicate bars on the quality of the treated surface

Improvement of the method of assessment of software for the control of vehicle parameters

Formation of the conditions for the effective functioning of the transportation system of the road transport enterprise

Methodological approach to solving the problem of functional reliability of automobile transport systems

Improving the fuel efficiency of a spark ignition engine under full load conditions by adding nitrogen oxide to the air charge

Ways of optimizing the quantity of individual transport in the limited possibilities of the street and road network

Combined method of foundry and thermal processes of manufacturing castings from iron-carbon alloys

Methodological basis of determination and control biofuels expenditure in the vehicle movement process

Methods of justification of spare parts stocks in the transport process management system

Study of acceleration modes Skoda Octavia on a roller stand

The newest technologies in environmentally safe polymeric coatings: research, technologies, prospects

Application of the CAD/CAE system Solidworks in the tasks of analysis of strength of parts of the clamping fixtures

Installing two internal combustion engines in series on a vehicle as a method of reducing torque unevenness

The influence of towing links on the handling of tractor self-propelled chassis

Justification for choosing the type of belt conveyor drive

Increasing the efficiency of ensuring the performance of vehicles

Study of the influence of external factors on the operational properties of an electric vehicle

Mathematical modeling of the movement of an armored vehicle with a 4×4 wheel formula with change of pressure in the wheel tires using the example of through KrAZ-Spartan

Analysis of the influence of construction factors on the passability of armored tank vehicles and the method of its increase at the account of automatic regulation of air pressure in wheel tires

Study of the process passenger transportation with modeling of public transport stops

Operation modes of the manipulator of the repair and evacuation machine

We inform you about the relocation of our website to the new address met-journal.com.ua/en

From the second issue of 2024, each new article will be published only on the website met-journal.com.ua/en

All indexing services will collect our content from the website met-journal.com.ua/en

Language

Information